Add:PANGCUN INDUSTRIAL ZONG,YINBIN DISTRICT,LUOLONG,HENAN 453621 P.R. CHINA
The number of welds in steel filing cabinets is appropriate
Author: lyaijinuoTime: 2018-06-29 09:10:59
1. First of all, it is necessary to ensure that the number of welds used is moderate, because not too much and not too little, and welding costs are increased if the size of the weld is too large. So, this can serve two purposes.
2. Secondly, it is necessary to determine the number of welds to be completed according to the process documentation or standard workshop process specification. Then our designers should consider the safety factors to design the welds and not add other additional safety factors.
3. In addition, the fillet size of the fillet weld in the fillet weld joint design is very important. Steel filing cabinets will increase the fillet size due to the area and number of welds, so the double fillet size will increase the weld metal by a factor of four.
We should note that intermittent fillet welds can be used to replace continuous fillet welds of the same fillet size under low or no load conditions. Try to make the weld in the thinner area of the weldment, so that the weld size is mainly concentrated on the sheet. In the case where ribs or welded spacers do not require excessive welding, the weld foot size or weld length should be minimized. These conditions are all necessary conditions that should be met. This is the minimum guarantee for the quality of steel filing cabinets.