Many people have already understood a lot about the various properties and benefits of the metal filing cabinet. In particular, the metal thickness and material of the metal filing cabinet are well understood. Many enterprise units buy the tin filing cabinets and buy them wrong. Why is this so? In fact, it is mainly because they do not know much about the material of the metal filing cabinet. Luoyang Ai Jiwei Xiaobian today will explain to you the problem of thickness discrimination of metal filing cabinets.

 

 

 

The metal filing cabinet is actually made of steel plate. The general thickness is 0.5MM, 0.6MM and 0.7MM. It is worth mentioning that the quality of the iron is also good or bad. Steel sheets, hot and cold rolling have large differences in flatness and load-bearing properties.

 

 

 

In addition, the thickness of the iron used is also a key point. The thicker the iron is, the better the quality. Of course, the higher the cost, so most metal filing cabinet manufacturers will falsely report the thickness. Adding the thickness of the two sides of the paint in the area, the result is 0.6MM, which is actually only 0.4-0.5MM.

 

 

 

Therefore, now the focus is coming, the small partners can pay attention to it: Until now, there are still many merchants who use low-grade metal filing cabinets to act as high-grade metal filing cabinets, and there are too many bad businesses. When you buy, you may wish to leave more than one eye, such as gently tapping the cabinet of the metal filing cabinet, feel the thickness of the material, or see if the surface treatment is flat, and then whether the handles, keys and other accessories are on the grade.

 

 

 

Everyone knows about this problem! In addition, Luoyang Aiji Xiaobian reminds everyone that although many metal filing cabinets look the same, almost the same products have a big difference, and there are a lot of tricks in them. Therefore, when buying a metal file cabinet, don't be greedy for a little cheaper.