Metal filing cabinets are actually made of steel plates. The general thicknesses are 0.5mm, 0.6mm and 0.7mm. It is worth mentioning that the quality of the iron sheet is also good or bad. Hot rolling and cold rolling are very different in terms of flatness and load bearing capacity.

 

In addition, the thickness of the metal sheet used is also a key point. The thicker the metal sheet is, the better the quality is. The higher the cost, of course, so most of the manufacturers of metal filing cabinets falsely report the thickness. With the thickness of the paint on both sides of the Cai District, the result was reported to be 0.6MM, in fact only 0.4-0.5MM.

Therefore, the focus is now on, small partners can pay attention to Kazakhstan: Until now, there are still many businesses to use low-grade metal file cabinets to act as high-grade metal filing cabinets, bad business too much. When purchasing, you may wish to keep an extra eye, such as gently tapping the cabinet of the metal file cabinet, to feel the thickness of the material, or to see if the surface treatment is smooth, and then whether the handle, key and other accessories are on the grade.

 

Many metal filing cabinets look the same, almost the same product actually has a big difference, which hides a lot of trickery, so when buying metal filing cabinets do not greedy that little cheaper, more than a few to see.