1, group framework

Before assembling the steel filing cabinet, the steel filing cabinet frame must be erected. It is necessary to find out the components of the back plate and the side plate, and connect a piece of back plate and two side plates with accessories to pave the way for the subsequent work. In the installation of screws and other connectors, attention should be paid to the degree of strength, as well as the degree of flatness can not be installed, less loaded, slide wire and other phenomena.

2, door frames and side panels.

Find out the front door frame of the steel file cabinet, and combine it with the side back panel of the above figure. This process does not require the accessories to be connected. The connection mode between them is the check of the slot. Just find the slot to lock After the assembly is completed, the inspection of the door is to be performed. The switch process is smooth, no abnormal sound, and no jamming occurs.

3, waist, top plate and bottom plate.

Find the middle waist, top plate, and bottom plate, install them one by one, and screw them. This sequence is best not to change. This is the most reasonable order of installation and relates to the overall stability. The same screws and other components to ensure complete flatness.

4, internal partitions.

To find out the small parts of the device partition, and confirm the quantity and integrity, then set the height of the partition according to the conditions of use, and use a snap to perform the fixed installation. At this time, the entire steel filing cabinet is dismantled and assembled. Assembly work.